modification Icom IC - 2N with Digital Controller Atmega16A

this idea came up. seeing a lot of Icom IC- 2N breakdown at some circuits . including the Dial Frequency over time damage. we want to make Icom IC - 2N is functioning again with a new appearance . even people thought this was not Icom IC - 2N. after much trial and error we have produced a digital controller for Icom - 2N.

we also make the front panel with buttons below the LCD. lcd right side are the volume , squelch and mic connectors. on the left there lcd Dial Frequency and RF Gain.

we also designed a box for this project . The main material used aluminum, while the front panel we use acrylic material

we use Proteus simulator for each of our microcontroller project . we are happy to use it because of its simplicity.

we use the IDE BascomAVR for modification Icom IC - 2N with Digital Control This Atmega16A.

the following new features after this project is finnished

1. Digital Dial with Rotary Encoder

2. Memory Chanel 0 - 16.

3. Signal Meter Bar

4. Auto Scan Stop

5. LCD display Informatif with TX, RX, Low/High Power, etc

6. Soft Push Button

7. 5KHz Frequency Step

Artikel Terkait

modification Icom IC - 2N with Digital Controller Atmega16A

4/ 5

Oleh Fauzi hp

Fauzi hp 2:03:00 PM 8 Komentar